Skip to main content

Site Navigation

Your Account

Choose Language

Help

Current version by: Gary ,

Text:

Two ways -
 
1- Load the Boxzy Interface software and use the Manual Controls move the platform (the Z minus direction or click the Z-home icon). DO NOT have the 3D Printing Module installed when you do this or you can crash the platform into the print head!
 
2- TipWith the power off, tip the whole thing over onto its side or face. Find the Z-motor drive on the bottom of the Boxzy and yank on the Z-axis belt to creep the platform up and away from the bottom of the unit.
2- TipWith the power off, tip the whole thing over onto its side or face. Find the Z-motor drive on the bottom of the Boxzy and yank on the Z-axis belt to creep the platform up and away from the bottom of the unit.

Status:

open

Original post by: Gary ,

Text:

Two ways -

1- Load the Boxzy Interface software and use the Manual Controls move the platform (the Z minus direction or click the Z-home icon).  DO NOT have the 3D Printing Module installed when you do this or you can crash the platform into the print head!

2- Tip the whole thing over onto its side or face. Find the Z-motor drive on the bottom of the Boxzy and yank on the Z-axis belt to creep the platform up and away from the bottom of the unit.

Status:

open