Skip to main content

Site Navigation

Your Account

Choose Language

Help

Current version by: James Nutter ,

Text:

TLDR:
 
X&Y Limit switch harness pin had come loose from use, replaced with fix it kit harness with improved glue and harness assembly, much more sturdy
 
Z axis missing steps mid program was fixed by using the recommended usb cable (had previously been using 25' cable)
 
There were lingering missed steps (much less pronounced) after these fixes, so I double checked the interface installation and made sure to remove the original interface per Just Helping's answer and that seems to have remedied these lingering glitches
 
Though if you are having these issues there is a lot of great troubleshooting info under Just Helping's answer

Status:

open

Original post by: James Nutter ,

Text:

TLDR:

X&Y Limit switch harness pin had come loose from use, replaced with fix it kit harness with improved glue and harness assembly, much more sturdy

Z axis missing steps mid program was fixed by using the recommended usb cable (had previously been using 25' cable)

Though if you are having these issues there is a lot of great troubleshooting info under Just Helping's answer

Status:

open