Skip to main content

Site Navigation

Your Account

Choose Language

Help

Original post by: Maz ,

Text:

The only values I've changed in here are the X and Y acceleration but I'll give a full list.

10:49:01.209 : EPR:2 75 115200 Baudrate

10:49:01.209 : EPR:3 129 854.136 Filament printed [m]

10:49:01.213 : EPR:2 125 602171 Printer active [s]

10:49:01.217 : EPR:2 79 0 Max. inactive time [ms,0=off]

10:49:01.221 : EPR:2 83 60000 Stop stepper after inactivity [ms,0=off]

10:49:01.225 : EPR:3 3 160.0000 X-axis steps per mm

10:49:01.230 : EPR:3 7 160.0000 Y-axis steps per mm

10:49:01.230 : EPR:3 11 320.0000 Z-axis steps per mm

10:49:01.234 : EPR:3 15 40.000 X-axis max. feedrate [mm/s]

10:49:01.238 : EPR:3 19 40.000 Y-axis max. feedrate [mm/s]

10:49:01.242 : EPR:3 23 20.000 Z-axis max. feedrate [mm/s]

10:49:01.246 : EPR:3 27 25.000 X-axis homing feedrate [mm/s]

10:49:01.250 : EPR:3 31 25.000 Y-axis homing feedrate [mm/s]

10:49:01.254 : EPR:3 35 10.000 Z-axis homing feedrate [mm/s]

10:49:01.258 : EPR:3 39 5.000 Max. jerk [mm/s]

10:49:01.262 : EPR:3 47 0.300 Max. Z-jerk [mm/s]

10:49:01.262 : EPR:3 133 0.000 X home pos [mm]

10:49:01.266 : EPR:3 137 0.000 Y home pos [mm]

10:49:01.271 : EPR:3 141 0.000 Z home pos [mm]

10:49:01.271 : EPR:3 145 165.000 X max length [mm]

10:49:01.275 : EPR:3 149 165.000 Y max length [mm]

10:49:01.279 : EPR:3 153 165.000 Z max length [mm]

10:49:01.283 : EPR:3 51 80.000 X-axis acceleration [mm/s^2]

10:49:01.287 : EPR:3 55 80.000 Y-axis acceleration [mm/s^2]

10:49:01.291 : EPR:3 59 25.000 Z-axis acceleration [mm/s^2]

10:49:01.298 : EPR:3 63 80.000 X-axis travel acceleration [mm/s^2]

10:49:01.299 : EPR:3 67 80.000 Y-axis travel acceleration [mm/s^2]

10:49:01.303 : EPR:3 71 25.000 Z-axis travel acceleration [mm/s^2]

10:49:01.307 : EPR:0 880 0 Autolevel active (1/0)

10:49:01.312 : EPR:3 200 100.000 Extr.1 steps per mm

10:49:01.316 : EPR:3 204 100.000 Extr.1 max. feedrate [mm/s]

10:49:01.320 : EPR:3 208 20.000 Extr.1 start feedrate [mm/s]

10:49:01.324 : EPR:3 212 10000.000 Extr.1 acceleration [mm/s^2]

10:49:01.324 : EPR:0 216 3 Extr.1 heat manager [0-3]

10:49:01.328 : EPR:0 217 255 Extr.1 PID drive max

10:49:01.332 : EPR:0 245 70 Extr.1 PID drive min

10:49:01.336 : EPR:3 218 4.0000 Extr.1 PID P-gain/dead-time

10:49:01.340 : EPR:3 222 0.5000 Extr.1 PID I-gain

10:49:01.340 : EPR:3 226 15.0000 Extr.1 PID D-gain

10:49:01.344 : EPR:0 230 255 Extr.1 PID max value [0-255]

10:49:01.348 : EPR:2 231 0 Extr.1 X-offset [steps]

10:49:01.352 : EPR:2 235 0 Extr.1 Y-offset [steps]

10:49:01.357 : EPR:1 239 1 Extr.1 temp. stabilize time [s]

10:49:01.361 : EPR:1 250 130 Extr.1 temp. for retraction when heating [C]

10:49:01.365 : EPR:1 252 15 Extr.1 distance to retract when heating [mm]

10:49:01.369 : EPR:0 254 255 Extr.1 extruder cooler speed [0-255]

Status:

open