Skip to main content

Site Navigation

Your Account

Choose Language

What is the pinout for the BOXZY 3D printer head wiring harness

Hi, I need to replace my 3D printer head. What is the pinout diagram for the wiring harness on the Boxzy canister

Here is a link to the wiring harness given in the Boxzy store. What are the different pins mapped to?

Update (07/23/2019)

Please note that from a previous order I know that the colour coding of the wires is not consistent. This means that from one order to another, the wire colours may be different so saying “red wire” “black wire” has been proven as meaningless.

I would like to know the actual pinout diagram.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Here is the board side, which is the only thing I have that provides detail on where the wires actually go. The harness connectors are the exact same pinout for each end, they do not switch around. So pin 1 of the board harness goes to pin 1 on the 3d printer harness, pin 2 goes to 2, etc.. The diagram shows the plug from underneath (wire side, not pin side).

Red and white on the diagram (pin 1 and 6) go to the thermistor, polarity doesn't matter. Grey and purple on the diagram (pin 4 and 9) go to the heater cartridge, polarity does not matter. Pin 5 and 10, pink and black, go to the fan. Pin 5 (pink) is ground, pin 10 ( black) is +19V (pwm).

main board_connector series 7

Was this answer helpful?

Score 1
Add a comment

Add your answer

Michael Chernoff will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 28