Skip to main content

Site Navigation

Your Account

Choose Language

How do I Mill from Reptier

I’m totally lost. I’m setting this up on a Mac as an emergency , my PC died. I went through all the set up of Slicr3 and when I get to the end of the this guide it says, load G—Code to Mill, which is all I do. There are no controls for moving the Mill etc. Am I missing something major here? I’m fluent with Mac and PC, but the Repetier has no controls and only looks like it will be set up for 3D printing. How do I Mill? Thanks for any help guys! Glenn

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Repetier Mac doesn't have a manual control window. All manual controls must be done via gcode. This section of the instructions goes over how to do that

1.3 Using Your BoXZY

To go to machine home you use G28 (which will home all axes. To specicify only one axis to home, you add the axis you want it to home. Example: G28 X

To go to user define home or 0, you use the G1 commands. Example G1 X0 Y0

Was this answer helpful?

Score 0
Add a comment

Add your answer

Glenn Auer will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 19