Skip to main content

Site Navigation

Your Account

Choose Language

These manuals will walk you through the BoXZY experience, from the first un-boxing to using your device for the first time. Please follow each numbered manual in sequence so that you don't miss any crucial information. After you complete 1.3 Using Your BoXZY, you'll be able to move on to the 3D Printing, Laser Engraving, and CNC Milling manuals.

89 Questions View all

What about the QUICK/CHANGE HEAD cable

In the Setting up your BOXZY section (wich is very well documented) you don't say what to do with that extra cable QUICK/CHANGE HEAD cable

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Chosen Solution

It should remain plugged into the machine and placed behind the machine when working. It can be left attached to the head and unplugged from the machine if you'd like, however, debris can get in the plug and it could become damaged during reattachment. So it is recommended for it to remain plugged in and placed aside.

Was this answer helpful?

Score 1
Add a comment

So what you are saying is that if have a quick change head obviously you attach this cable to it.

But if you got the boxzy without the quick-change head you just leave it attached to the machine and maybe tape the end of it to the back of the boxzy casing?

Thanks

Was this answer helpful?

Score 0

Comments:

Correct. However, If you do not have any of the quick change heads, you can also remove the cable and tape over the plug socket.

by

Add a comment

Add your answer

Imp will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 57