Skip to main content

Site Navigation

Your Account

Choose Language

This section is for questions and advanced guides for BoXZY's laser head.

30 Questions View all

Fusion 360 post for Laser

Is there a post processor for the laser in Fusion 360 to go over to BoxZY?

with the new sheet metal module in Fusion 360 and using it to cut out cardboard box layouts would make it easy to use.

I want to make dimensional cuts and or etching and a picture just wouldn't do.

Or does anyone out there has a work around for this issue?

Answer this question I have this problem too

Is this a good question?

Score 1
Add a comment

1 Answer

Most Helpful Answer

The post immediately following this one is a modified smoothie post processor. The modified code turns it into a Boxzy laser post processor for Fusion360.

Copy the text of the next post and paste it into notepad. Save the file as “smoothie Boxzy laser rev01.cps” or something else that makes sense to you. The only must is that it have extension “.cps”, but it is best practice to throw “Boxzy” and “laser” in the filename somewhere for searching purposes.

Save that file into the folder that holds your other post processors. See the attached picture to open that folder.

Block Image

Attached are some photos and a video of the functioning code:

Block Image

Block Image

PS: The smoothie processor does a few (minor) weird things, and I didn’t mess with those. It throws multiple (duplicate) G28 and G90 commands at both the beginning and end of the code. I manually comment those out after processing.

Was this answer helpful?

Score 2


The code is too long to post. Will need to figure out gitHub or some other means of posting the code.


very cool Brian


Add a comment

Add your answer

Joe Krieg will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 100