Site Navigation

Your Account

Choose Language

Cutting magnet material with laser attachment

Hi all,

I have a magnet material thickness 0.42 mm, Could it be possible to cut this material using cut outline, and what could be the parameters? (speed, etch power, focus values, pixel clipping etc?

Thanks

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

3 Answers

I have tested with the following values but no result.

Here is the values:

Cut Outline

Etch Power: 0-100

Focus Material: 0.4 mm

Z: 51.1 mm

Pixel Clipping: 20-80

How can I set the accuracy of the laser focus?

Maybe there are some missing parameters in Boxzy.dll, there could be repeat parameter in the application to cut thick materials (to follow the pattern repetition).

And the second thing is when you click the Focus button, it calculates again and again and the focus of Z value getting calculated faulty.

Thanks

Was this answer helpful?

Score 0
Add a comment

Hi Jones,

What color is your material?

Boxzy will not be able to cut shiny materials, because the reflected light will reduce the laser intensity.

See this thread: Cutting with Laser Tool

You might try to paint or coat your material in a dark color.

Hope this helps you!

Was this answer helpful?

Score 0
Add a comment

Thanks for the reply but my material is not shiny nor transparent. it is nearly blackish. So I found that the laser focus is not accurate. Is there a method to make laser focus much more accurate? Or Can we change the laser with more strong one? Links and infos are welcome.

Thanks.

Was this answer helpful?

Score 0

Comments:

Also I tried to cut the 2 mm balsa material but with no success.

Could someone achieved to cut something with this laser, please enlighten us with all the parameters.

Thanks.

by

Add a comment

Add your answer

Jones will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 165