Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by BoXZY

Edit approved by BoXZY

Deleted
Added
Unchanged

Step Lines

[title] Generate G-Code
[* black] '''Rename''' your file by selecting the '''Untitled''' file name, as indicated by the ''red square'' in the image, type in your '''''New Project Title''''' and select ''Rename'', as indicated by the ''red arrows'' in the image
[* black] Next you select your Shape or SVG import file and then select '''Machine''', as indicated by the ''blue box ''in the image
[* black] Then select '''Advanced''' from the ''Machine Menu'', as indicated by the ''blue arrow ''in the image
[* black] After selecting '''Advanced''' a new window will open where you will see your '''Safety Height''' and '''Step Over %''', indicated by the ''blue box'' in the image
[* black] '''Safety Height''' is the retraction height of the bit when it moves between the Toolpaths, this can be adjusted to avoid clamps or differences in material height
[* black] '''Step Over % '''is the % of the bit diameter that will be actually cutting the material, the smaller you go the less material you cut each pass, this is used primarily in the '''Fill''' cut of a Toolpath
[* black] To generate your G-Code select '''Generate G-Code,''' as indicated by the ''red box'' in the image, the G-Code will process
[* black] The '''Export G-Code''' button will reveal itself after selecting ''Generate G-Code'', as indicated by the ''red arrow'', select it and a save window will open. '''Save''' your file, which will be sent to your web browser download folder

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added