Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by BoXZY

Edit approved by BoXZY

Deleted
Added
Unchanged

Step Lines

[title] Controlling BoXZY with Manual Controls
[title] Controlling BoXZY with Manual Controls
[* orange] The control buttons for moving the '''X axis''' will be the ''HorizontalTriangles''
[* violet] The control buttons for moving the '''Y axis''' will be the ''Vertical Triangles
[* black] You can move each X and Y axis incrementally by selecting a specific area of the control button dedicated to the increment, this is shown in the first image''second image''.
[* black] You can move each X and Y axis incrementally by selecting a specific area of the control button dedicated to the increment, this is shown in the first image''second image''.
[* icon_note] Moving the X or Y a positive direction will move the X or Y axis away from the the origin limit switch
[* icon_remindericon_caution] Remember, these numbers are in millimeters and if you double tap the increment you will move that distance twice with almost no pause in between each move. Be careful when using the manual control buttons.
[* black] The control buttons for moving the Z''' axis '''will look like the buttons you see in the second image''third image'', they will be located to the right of the X and Y control buttons.
[* icon_remindericon_caution] Remember, these numbers are in millimeters and if you double tap the increment you will move that distance twice with almost no pause in between each move. Be careful when using the manual control buttons.
[* black] The control buttons for moving the Z''' axis '''will look like the buttons you see in the second image''third image'', they will be located to the right of the X and Y control buttons.
[* black] Moving the Z in a positive direction will move the Z axis away from the limit switch, this will lower the platform.
[* blackicon_note] The build area of the BoXZY is 165mm x 165mm x 165mm. There are limit switches onto prevent the BoXZY from moving past 165mm in any direction, when BoXZY contacts these switches it ignore any Gcode that tells it to go beyond that 165mm position and continue the other Gcode.
[* blackicon_note] The build area of the BoXZY is 165mm x 165mm x 165mm. There are limit switches onto prevent the BoXZY from moving past 165mm in any direction, when BoXZY contacts these switches it ignore any Gcode that tells it to go beyond that 165mm position and continue the other Gcode.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

No previous image

Added