Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by BoXZY

Edit approved by BoXZY

Deleted
Added
Unchanged

Step Lines

[title] Playing with BoXZY and Gcode
[* green] Select the '''Print Preview '''tab then select the '''G-Code Editor''' tab from in your BoXZY settingsbutton and control tabsyou will now have access to the G-Code Editor Tab and G-Code Editor
[* light_blue] This is where your Gcode will be stored,stored after you Slice a file or load your Milling file. You won't need to edit your Gcode until you have a mastery understanding of how it works, but let's play around with some simple commands.
[* black

[* blue
] ''Gcode'' is read line by line and each line is treated like a command
[* black] Type the commandseach line shown in the second image into your G-Code Editor
[* black] Double Check the G-Code you input into your G-Code Editor with the Gcode provided in the second image.
[* red] Select the '''Start Print''' button in the upper left hand corner of the BoXZY Interface and watch BoXZY move.
[* green] Select the '''Print Preview '''tab then select the '''G-Code Editor''' tab from in your BoXZY settingsbutton and control tabsyou will now have access to the G-Code Editor Tab and G-Code Editor
[* light_blue] This is where your Gcode will be stored,stored after you Slice a file or load your Milling file. You won't need to edit your Gcode until you have a mastery understanding of how it works, but let's play around with some simple commands.
[* black

[* blue
] ''Gcode'' is read line by line and each line is treated like a command
[* black] Type the commandseach line shown in the second image into your G-Code Editor
[* black] Double Check the G-Code you input into your G-Code Editor with the Gcode provided in the second image.
[* red] Select the '''Start Print''' button in the upper left hand corner of the BoXZY Interface and watch BoXZY move.

Image 1

Old Version

New Version

Image 2

Old Version

New Version