Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by BoXZY

Edit approved by BoXZY

Deleted
Added
Unchanged

Step Lines

[title] Playing with BoXZY and Gcode
[* green] Select the '''Print Preview '''tab then select the '''G-Code Editor''' button and you will now have access to the G-Code Editor Tab and G-Code Editor
[* light_blue] This is where your Gcode will be stored after you Slice a file or load your Milling file. You won't need to edit your Gcode until you have a mastery understanding of how it works, but let's play around with some simple commands.commands
[* light_blue] This is where your Gcode will be stored after you Slice a file or load your Milling file. You won't need to edit your Gcode until you have a mastery understanding of how it works, but let's play around with some simple commands.commands
[* blue] ''Gcode'' is read line by line and each line is treated like a command
[* black] Type each line shown in the second image into your G-Code Editor
[* black] Double Check the G-Code you input into your G-Code Editor with the Gcode provided in the second image.image
[* black] In your 3D preview window on the left side of your BoXZY Interface you will see your Gcode represented by blue lines, this is seen in the third image

[* red] Select the '''Start Print''' button in the upper left hand corner of the BoXZY Interface and watch BoXZY move.move
[* black] Double Check the G-Code you input into your G-Code Editor with the Gcode provided in the second image.image
[* black] In your 3D preview window on the left side of your BoXZY Interface you will see your Gcode represented by blue lines, this is seen in the third image

[* red] Select the '''Start Print''' button in the upper left hand corner of the BoXZY Interface and watch BoXZY move.move

Image 3

Old Version

New Version