Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Just Helping

Edit approved by Just Helping

Deleted
Added
Unchanged

Step Lines

[title] Sending single lines of Gcode to your BoXZY
[* black] '''Gcode''' is the language BoXZY understands. It's how BoXZY knows what to do. When you press a button in the interface it automatically sends Gcode to BoXZY. You can also enter this code manually
[* blue] SelectIn any order, select the ''X Home button, the Y Home button ''then ''the Z Home button'' to move all 3 axis to their Home position
[* blue] SelectIn any order, select the ''X Home button, the Y Home button ''then ''the Z Home button'' to move all 3 axis to their Home position
[* red] The BoXZY Gcode sender input line is denoted by the ''red box ''in the first image
[* green] Type the following into your Gcode sender line: '''G1 X80'''
[* icon_reminder] Gcode is sensitive to formatting. Only enter it in exactly as shown.
[* green] To send this Gcode to BoXZY from the BoXZY Interface click the '''Send''' button
[* icon_note] The '''G1''' command is the '''Go To''' command. This means our example Gcode "'''G1 X80'''" is telling BoXZY to move the Attachment Mount along the X axis to the location that is 80mm away from the Home Location
[* black] If you want to move more than one axis at a time you can do so. One example is '''G1 X10 Y20 Z30'''. That will move all 3 axes at once to varying positions. Give it a try