Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by Just Helping

Edit approved by Just Helping

Deleted
Added
Unchanged

Step Lines

[title] G-Code Editor Loading/Saving
[* blue] The ''blue arrow '' in the first image denotes the '''Save''' button in your G-Code Editor
[* blue] Select the '''Save''' button and save the Gcode you input in the last step as '''Test.Square''' so you can return to it and review the Gcode at another time
[* red] The ''red arrow'' in the first image denotes the '''New Text''' button in your G-Code Editor
[* icon_note] Before you load a new file (for 3D printing, milling or laser etching) make sure you check that there is no Gcode in your G-Code Editor. Use the ''New Text'' button to clear out any code in your G-Code Editor
[* green] To load a new 3D Print file or Gcode Milling file select the '''Load''' button from the top left corner of your BoXZY Interface and locate the filefile. You will use the same button to load and locate .STL files. The "BoXZY" tab will have it's own "Load" button for opening images. There are more details regarding this in the specific guides for each individual attachment.
[* green] To load a new 3D Print file or Gcode Milling file select the '''Load''' button from the top left corner of your BoXZY Interface and locate the filefile. You will use the same button to load and locate .STL files. The "BoXZY" tab will have it's own "Load" button for opening images. There are more details regarding this in the specific guides for each individual attachment.