Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by Just Helping

Edit approved by Just Helping

Deleted
Added
Unchanged

Step Lines

[title] G-Code Editor Loading/Saving
[* icon_reminder] The ''blue arrow '' in the first image denotes the '''Save''' button in your G-Code Editor
[* blue] Select the '''Save''' button and save the Gcode script as '''Test.Square''' so you can return to it and reference the script at another time
[* icon_reminder] The ''red arrow'' in the first image denotes the '''New Text''' button in your G-Code Editor
[* yellow] Before you loadwork with a new file (for 3D printing, milling or laser etching)of any type, make sure you check that there is no Gcodeyou've already saved your current script in your G-Code Editor. Any current script will be overwritten upon loading a new file. Use the ''New Text'' button to clear out any code in your G-Code Editor when manually writing your own.
[* yellow] Before you loadwork with a new file (for 3D printing, milling or laser etching)of any type, make sure you check that there is no Gcodeyou've already saved your current script in your G-Code Editor. Any current script will be overwritten upon loading a new file. Use the ''New Text'' button to clear out any code in your G-Code Editor when manually writing your own.
[* green] To load a new Gcode file select the '''Load''' button from the top left corner of your BoXZY Interface and locate the file. This button will also be used in later guides for opening other types of files.