Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by Badley Bratt

Edit approved by Badley Bratt

Deleted
Added
Unchanged

Step Lines

[title] Using your E-stop
[* icon_note] BoXZYBoXZY's Power Station has integrated aan Emergency Stop button or '''e-Stop''' to allowe-stop''' that allows you to immediately stop mistakes once they start. Your Milling headYou should ''never'' be pluggedalways'' plug your milling head into anything but the Power StationStation, so that it can also be stoppedwill stop along with the e-StopBoXZY if you use the e-stop when you're millingmilling.
[* black] '''LetsLet's practice using it'''. Press play on your new GcodeG-code script and allowso it starts to start runningrun.
[* red] About half wayhalfway through, hit your big red physical '''e-Stopbig, red, '''physical e-stop''' switch on the Power Station whichStation, as shown in the first image. This will stop the machine in its trackstracks.
[* icon_reminder] Now you have stopped the machine from running. ''We'reWe're not ready to twist the button to release just yet''. Inyet. The red arrow in the 3rdthird image you will seeshows the Software e-Stop button'''software e-stop button''' in the upper right hand corner of the interfaceinterface.
[* red] Now click the '''software e-Stope-stop button'''. You may hear two small clicks come from the machine when this happenshappens.
[* black] You can now''now twist the physical button ''to'''physical e-stop button''' to release it and resume power to BoXZY. You will need to re-home the machine whenever you hit the '''software e-Stop'''e-stop'''.
[* icon_note] You should always hit the '''physical e-Stope-stop''' before placing your hands in the machine. You only need to hit the '''software e-Stop '''featuree-stop button''' if commands were sent to the machine while the ''physical button'physical e-stop''' was compressed. This includes times you forget the physical button is still compressed when attempting to resume using BoXZY.
[* icon_note] BoXZYBoXZY's Power Station has integrated aan Emergency Stop button or '''e-Stop''' to allowe-stop''' that allows you to immediately stop mistakes once they start. Your Milling headYou should ''never'' be pluggedalways'' plug your milling head into anything but the Power StationStation, so that it can also be stoppedwill stop along with the e-StopBoXZY if you use the e-stop when you're millingmilling.
[* black] '''LetsLet's practice using it'''. Press play on your new GcodeG-code script and allowso it starts to start runningrun.
[* red] About half wayhalfway through, hit your big red physical '''e-Stopbig, red, '''physical e-stop''' switch on the Power Station whichStation, as shown in the first image. This will stop the machine in its trackstracks.
[* icon_reminder] Now you have stopped the machine from running. ''We'reWe're not ready to twist the button to release just yet''. Inyet. The red arrow in the 3rdthird image you will seeshows the Software e-Stop button'''software e-stop button''' in the upper right hand corner of the interfaceinterface.
[* red] Now click the '''software e-Stope-stop button'''. You may hear two small clicks come from the machine when this happenshappens.
[* black] You can now''now twist the physical button ''to'''physical e-stop button''' to release it and resume power to BoXZY. You will need to re-home the machine whenever you hit the '''software e-Stop'''e-stop'''.
[* icon_note] You should always hit the '''physical e-Stope-stop''' before placing your hands in the machine. You only need to hit the '''software e-Stop '''featuree-stop button''' if commands were sent to the machine while the ''physical button'physical e-stop''' was compressed. This includes times you forget the physical button is still compressed when attempting to resume using BoXZY.