Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #1

Edit by BoXZY

Edit approved by BoXZY

Before
After
Unchanged

Step Lines

[title] Leveling the Leveling Platform: part 1
[* icon_reminder] Before we can begin operating BoXZY, power up your BoXZY and connect to your BoXZY through the BoXZY Interface
[* black] The first step is to use an Allen Wrench'''Allen Wrench''' to tighten the three (3) bolts on the Z axis mounted build plate alluntil the way downspring is fully compressed, as seen in the firstsecond image
[* black] The second step is to remove the Platform from the bubble wrapped manila envelope and place the platform in the BoXZY so that the 3 magnets underneath the Leveling Platform line up with the 3 bolts on the Z axis mounted build plate, as seen in the secondthird image
[* black] The first step is to use an Allen Wrench'''Allen Wrench''' to tighten the three (3) bolts on the Z axis mounted build plate alluntil the way downspring is fully compressed, as seen in the firstsecond image
[* black] The second step is to remove the Platform from the bubble wrapped manila envelope and place the platform in the BoXZY so that the 3 magnets underneath the Leveling Platform line up with the 3 bolts on the Z axis mounted build plate, as seen in the secondthird image
[* black] The next step is to use your Manual Control tab in the BoXZY Interface to send the X, Y and Z axis to their origin limit switches
[* black] If you do not remember how to do this refer back to our [guide|110|using your BoXZY] guide

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added