Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #1

Edit by BoXZY

Edit approved by BoXZY

Before
After
Unchanged

Step Lines

[title] Leveling the Leveling Platform: part 1
[* icon_reminder] Before we can begin operating BoXZY, power up your BoXZY and connect to your BoXZY through the BoXZY Interface
[* black] The first step is to use an '''Allen Wrench''' to tighten [* icon_caution] Do not put your hands in your BoXZY while the three (3) bolts on the Z axis mounted build plate until the springit is fully compressed, as seen inpowered, press the second imageE-Stop before and after using your hands inside of your BoXZY
[* black] If you received your BoXZY prior to that date refer to [guide|9|this leveling guide]

[* black] The secondfirst step is to remove the Platform from the bubble wrapped manila envelope and place the platform in the BoXZY so that the 3 magnets underneath the Leveling Platform line up with the 3 bolts on the Z axis mounted build plate, as seen in the third image
[* black] The first step is to use an '''Allen Wrench''' to tighten [* icon_caution] Do not put your hands in your BoXZY while the three (3) bolts on the Z axis mounted build plate until the springit is fully compressed, as seen inpowered, press the second imageE-Stop before and after using your hands inside of your BoXZY
[* black] If you received your BoXZY prior to that date refer to [guide|9|this leveling guide]

[* black] The secondfirst step is to remove the Platform from the bubble wrapped manila envelope and place the platform in the BoXZY so that the 3 magnets underneath the Leveling Platform line up with the 3 bolts on the Z axis mounted build plate, as seen in the third image
[* black] The next step is to use your Manual Control tab in the BoXZY Interface to send the X, Y and Z axis to their origin limit switches
[* black] If you do not remember how to do this refer back to our [guide|110|using your BoXZY] guide

Image 1

Old Version

New Version

Image 2

Deleted

Image 3

Deleted