Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #1

Edit by BoXZY

Edit approved by BoXZY

Before
After
Unchanged

Step Lines

[title] Leveling the Leveling Platform: part 1
[* icon_reminder] Before we can begin to use BoXZY for 3D Printing check that your BoXZY is connected to the BoXZY Power Supply and the USB cable is connected to your computer
[* icon_caution] Disable your BoXZY by pushing the e-stop button on the Power Supply before reaching inside. Don’t forget to release the e-stop when your hands are clear and you are ready to run your BoXZY
[* icon_note] If you received your BoXZY prior to <THIS DATE>before June 20th 2016 refer to steps 11 through 16 of [guide|9|this leveling guideguide|stepid=42]
[* icon_note] If you received your BoXZY prior to <THIS DATE>before June 20th 2016 refer to steps 11 through 16 of [guide|9|this leveling guideguide|stepid=42]
[* red] Now you can remove the Leveling Platform from the bubble wrapped manila envelope and place the Platform in the BoXZY so that the 3 magnets underneath the Leveling Platform line up with the 3 bolts on the Milling Platform, as seen in the ''second'' and ''third'' images.
[* black] Open the Manual Control tab in the BoXZY Interface Home the X, Y and Z axis
[* black] If you do not remember how to do this refer back to our [guide|110|using your BoXZY] guide
[* icon_reminder] You can apply many 3D Printing strategies and advanced techniques to printing with BoXZY. If you would like you may remove the Leveling Platform and apply Blue Painters tape or Kapton Tape to the Leveling Platform and then re-insert it into your BoXZY