Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #1

Edit by Just Helping

Edit approved by Just Helping

Before
After
Unchanged

Step Lines

[title] Preparing for leveling
[* icon_caution] Always use the physical e-Stop on the Power Station to disable BoXZY before putting your hands inside the machine. Remember to re-apply power before usingrelease the machinee-Stop by twisting it, to turn the power back on.
[* black] Place your platformLevelling Platform in the BoXZY so that the 3 magnets underneathon the Leveling Platformunderside line up with the 3 bolts on the Milling Platform, as seen in the ''second'' and ''third'' images.
[* icon_reminder] It is very important to placereposition the platform magnets firmly over the magnets eachbolt heads every time you remove and re-install ittake off the Levelling Platform. Verify it does not rock, even slightly, and useslightly. Use some pressure to make sure it is well seated
[* icon_caution] Always use the physical e-Stop on the Power Station to disable BoXZY before putting your hands inside the machine. Remember to re-apply power before usingrelease the machinee-Stop by twisting it, to turn the power back on.
[* black] Place your platformLevelling Platform in the BoXZY so that the 3 magnets underneathon the Leveling Platformunderside line up with the 3 bolts on the Milling Platform, as seen in the ''second'' and ''third'' images.
[* icon_reminder] It is very important to placereposition the platform magnets firmly over the magnets eachbolt heads every time you remove and re-install ittake off the Levelling Platform. Verify it does not rock, even slightly, and useslightly. Use some pressure to make sure it is well seated
[* black] Open the Manual Control tab in the BoXZY Interface Home the X, Y and Z axis
[* black] If you do not remember how to do this refer back to our [guide|110|using your BoXZY] guide