Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #1

Edit by Just Helping

Edit approved by Just Helping

Before
After
Unchanged

Step Lines

[title] Preparing for leveling
[* icon_caution] Always use the e-Stop on the Power Station to disable BoXZY before putting your hands inside the machine. Remember to release the e-Stop by twisting it, to turn the power back on.
[* black] Place your LevellingLeveling Platform in the BoXZY so that the 3 magnets on the underside line up with the 3 bolts on the Milling Platform, as seen in the ''second'' and ''third'' images.
[* icon_reminder] It is very important to reposition the platform magnets firmly over the bolt heads every time you take off the LevellingLeveling Platform. Verify it does not rock, even slightly. Use some pressure to make sure it is well seated
[* black] Place your LevellingLeveling Platform in the BoXZY so that the 3 magnets on the underside line up with the 3 bolts on the Milling Platform, as seen in the ''second'' and ''third'' images.
[* icon_reminder] It is very important to reposition the platform magnets firmly over the bolt heads every time you take off the LevellingLeveling Platform. Verify it does not rock, even slightly. Use some pressure to make sure it is well seated
[* black] Open the Manual Control tab in the BoXZY Interface Home the X, Y and Z axis
[* black] If you do not remember how to do this refer back to our [guide|110|using your BoXZY] guide