Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by BoXZY

Edit approved by BoXZY

Before
After
Unchanged

Step Lines

[title] Leveling the Leveling Platform: part 2
[* black] TakeBoXZY uses a 3 point leveling system in a two part process to level the Leveling Platform so first take a small clean piece of cardboard and fold it in half
[* black] Move the BoXZY attachment mount to be above the middle bolt on the Leveling Platform, this bolt is towardsPlatform at the back of the machine
[* black] TakeBoXZY uses a 3 point leveling system in a two part process to level the Leveling Platform so first take a small clean piece of cardboard and fold it in half
[* black] Move the BoXZY attachment mount to be above the middle bolt on the Leveling Platform, this bolt is towardsPlatform at the back of the machine
[* black] The Gcode that will position the BoXZY is: G1 X1 Y82.5
[* black] Place the cardboard underneath the attachment mount and place the 3D Printing Head into the attachment mount, letting it restmount. Set the head in so that the 3D Printing Nozzle rests on top of the folded cardboard. Lock the 3D Printing Head into the attachment mount
[* icon_note] When you insert the 3D Printing Head, keep the Nozzle on the locking side on the attachment mount, this can be seen in the second image

[* black] Slide the carboardcardboard out from underneath the 3D Printing Head leaving the 3D Printing Head locked in place
[* violet] Move the 3D Printing Head all the way to the ''Front Left'' corner of your BoXZY, as seen in the second image then slide the cardboard under the Nozzle and adjust the Leveling bolt with a 90 degree Allen Wrench so that the Nozzle touches the cardboard
[* violet] Repeat this last part of this step for the ''Front Right'' side of your BoXZY,
[* black] Place the cardboard underneath the attachment mount and place the 3D Printing Head into the attachment mount, letting it restmount. Set the head in so that the 3D Printing Nozzle rests on top of the folded cardboard. Lock the 3D Printing Head into the attachment mount
[* icon_note] When you insert the 3D Printing Head, keep the Nozzle on the locking side on the attachment mount, this can be seen in the second image

[* black] Slide the carboardcardboard out from underneath the 3D Printing Head leaving the 3D Printing Head locked in place
[* violet] Move the 3D Printing Head all the way to the ''Front Left'' corner of your BoXZY, as seen in the second image then slide the cardboard under the Nozzle and adjust the Leveling bolt with a 90 degree Allen Wrench so that the Nozzle touches the cardboard
[* violet] Repeat this last part of this step for the ''Front Right'' side of your BoXZY,

Image 1

No previous image

Added

Image 2

No previous image

Added