Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by BoXZY

Edit approved by BoXZY

Before
After
Unchanged

Step Lines

[title] Leveling the Leveling Platform: part 2
[* black] a
[*
black] BoXZY uses a 3''3 point leveling system in a two part processsystem'' method to level the Leveling Platform so first take a small clean pieceto the motion of cardboardthe X and fold it in halfY axis
[* black] MoveUse the BoXZY Interface to '''move''' the BoXZY attachment mount to be above the middle bolt on the Leveling Platform at the back of the machine
[* black] a
[*
black] BoXZY uses a 3''3 point leveling system in a two part processsystem'' method to level the Leveling Platform so first take a small clean pieceto the motion of cardboardthe X and fold it in halfY axis
[* black] MoveUse the BoXZY Interface to '''move''' the BoXZY attachment mount to be above the middle bolt on the Leveling Platform at the back of the machine
[* black] The Gcode that will position the BoXZY is: G1 X1 Y82.5
[* black] Place the cardboard underneath the attachment mount and place the 3D'''Remove''' your ''3D Printing Head intoHead'' from the attachment mount. Setwhite box marked '''3D Printing''', use the head in so thathandle at the 3D Printing Nozzle rests on top of the folded cardboard. Lock the 3D Printing Head intowhen handling the attachment mount
[* icon_note] When you insert the 3D Printing Head, keep the Nozzle on the locking side on the attachment mount, this can be seen in the second image
[* black] Slide the cardboard out from underneath the 3D Printing Head leaving the 3D Printing Head locked in place
[* violet] Move the 3D Printing Head all the way to the ''Front Left'' corner of your BoXZY, as seen in the second image then slide the cardboard under the Nozzle and adjust the Leveling bolt with a 90 degree Allen Wrench so that the Nozzle touches the cardboard
[* violet] Repeat this last part of this step for the ''Front Right'' side of your BoXZY,
[* black] Place the cardboard underneath the attachment mount and place the 3D'''Remove''' your ''3D Printing Head intoHead'' from the attachment mount. Setwhite box marked '''3D Printing''', use the head in so thathandle at the 3D Printing Nozzle rests on top of the folded cardboard. Lock the 3D Printing Head intowhen handling the attachment mount
[* icon_note] When you insert the 3D Printing Head, keep the Nozzle on the locking side on the attachment mount, this can be seen in the second image
[* black] Slide the cardboard out from underneath the 3D Printing Head leaving the 3D Printing Head locked in place
[* violet] Move the 3D Printing Head all the way to the ''Front Left'' corner of your BoXZY, as seen in the second image then slide the cardboard under the Nozzle and adjust the Leveling bolt with a 90 degree Allen Wrench so that the Nozzle touches the cardboard
[* violet] Repeat this last part of this step for the ''Front Right'' side of your BoXZY,

Image 1

Deleted

Image 2

Deleted