Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by BoXZY

Edit approved by BoXZY

Before
After
Unchanged

Step Lines

[title] Leveling the Leveling Platform: part 2
[* icon_note] BoXZY uses a ''3 point leveling method'' to level the Leveling Platform parallel to the motion of the X and Y axis
[* icon_note] BoXZY uses a ''3 point leveling method'' to level the Leveling Platform parallel to the motion of the X and Y axis
[* black] Use the BoXZY Interface to '''move''' the BoXZY attachment mount to be above the middle bolt on the Leveling Platform at the back of the machine
[* black] The Gcode that will position the BoXZY is: G1 X1 Y82.5
[* black] '''Remove''' your ''3D Printing Head'' from the white box marked '''3D Printing''', use the handle at the top of the 3D Printing Head when handling the attachment
[* icon_note] The following steps will require you to use a Business card to level your Leveling Platform. If this is your First time leveling the platform follow the guide using a flat piece of card board that is thicker than a business card and then repeat the level process with the business card
[* black] Place a Business Card directly underneath the attachment mount on the Leveling Platform
[* black] Insert your 3D Printing Head into the attachment mount allowing the 3D Printing Nozzle to sit directly on top of the Business Card and lock your 3D Printing Head into the attachment
[* icon_note] Make sure that your Nozzle is positioned in the attachment mount as it is seen in the second image