Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Just Helping

Edit approved by Just Helping

Before
After
Unchanged

Step Lines

[title] Leveling the Platform: part 1
[* icon_note] BoXZY uses a ''3 point leveling method'' to make sure the nozzle moves perfectly parallel to the platform during X and Y movements. This is a ''very'' important initial setup step that only needs to be repeated if the bolts are moved.
[* blue] While the attachment mount is still empty, use the BoXZY Interface to '''move''' the mount above the middle, back bolt on the platform
[* icon_note] The Gcode that will position the BoXZY is: G1 X1 Y82.5
[* orange] '''Remove''' your ''3D Printing Attachment'' from the white box marked '''3D Printing''.' Always use the handle when using the attachment.
[* icon_reminder] The Leveling Procedure will ask you to use a business card to level your platform. If this is your very first time leveling the platform follow the guide using a very thick, flat piece of cardboard in place of the business card. Then repeatRepeat the leveling processprocedure with the business card. This eliminates the risk of crashing your nozzle during levelingnozzle.
[* icon_reminder] The Leveling Procedure will ask you to use a business card to level your platform. If this is your very first time leveling the platform follow the guide using a very thick, flat piece of cardboard in place of the business card. Then repeatRepeat the leveling processprocedure with the business card. This eliminates the risk of crashing your nozzle during levelingnozzle.
[* black] Place the business card directly underneath the attachment mount on the Leveling Platform. The images show a taped platform, there should not be tape on the platform during leveling.
[* red] Unlock the lever for the attachment mount. Insert your 3D Printing Attachment into it, allowing the nozzle to sit directly on top of the business card. Lock your 3D Printing Attachment into the mount with the lever. Adjust the lever as necessary. ''Do not plug the cable in at this time''
[* icon_caution] Always verify that your Z is at its home position before inserting the 3D print head. Otherwise scary noises and damage can occur.occur! The Nozzlenozzle should be positioned in the attachment mount for leveling as it is seenshown in the second image.
[* icon_caution] Always verify that your Z is at its home position before inserting the 3D print head. Otherwise scary noises and damage can occur.occur! The Nozzlenozzle should be positioned in the attachment mount for leveling as it is seenshown in the second image.