Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by BoXZY

Edit approved by BoXZY

Before
After
Unchanged

Step Lines

[title] Leveling the Leveling Platform: part 3
[* black] Keeping your 3D Printing Head locked into the attachment mount ''pull ''the Business Card out from underneath the Nozzle, the Nozzle should create a slight mark on the Business Card
[* black]
Card. Label this mark ''Back''
[* black] Keeping your 3D Printing Head locked into the attachment mount ''pull ''the Business Card out from underneath the Nozzle, the Nozzle should create a slight mark on the Business Card
[* black]
Card. Label this mark ''Back''
[* black] Send your 3D Printing Head to the ''Front Left'' corner of your BoXZY. The Gode is: ''' G1 X165 Y1'''
[* black] Slide your Business Card under the Nozzle. You will now adjust the the Bolt in that same corner to Raise or Lower the Leveling Platform so that the Business Card touches the Nozzle, this is seen in the first image
[* black] Label the mark you make when sliding the business card out from under the Nozzle ''Left''
[* black] Repeat this step for the ''Front Right ''corner of your BoXZY: The Gcode is: '''G1 X165 Y165'''
[* black] You will now have a Business Card with 3 marks made by the Nozzle at each point of leveling, the back, the front left and the front right, as seen in the second image
[* icon_note] Examine the 3 marks and use your discretion to judge their the uniform nature of their depth into the Business Card. Ifuniformity If they are similar you are level. You may return to this step to fine tune the platform at any time before 3D Printing
[* icon_note] Examine the 3 marks and use your discretion to judge their the uniform nature of their depth into the Business Card. Ifuniformity If they are similar you are level. You may return to this step to fine tune the platform at any time before 3D Printing