Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by Just Helping

Edit approved by Just Helping

Before
After
Unchanged

Step Lines

[title] Leveling the Leveling Platform: part 3
[* blackgreen] Keeping your 3D Printing Head locked into the attachment mount ''pull ''the Business Card out from underneath the Nozzle, the Nozzle should create a slight mark on the Business Card. Label this mark ''Back '''"Back"'''
[* blackorange] Send your 3D Printing Head to the ''Front Left'' corner of your BoXZY. The Gode is: ''' G1 X165 Y1'''
[* blackyellow] Slide your Business Card under the Nozzle. YouWith a 3mm allen key wrench you will now adjust the the Bolt in that same corner to Raise or Lower the Leveling Platform so that the Business Card touches the Nozzle, this is seen in the first image
[* black] Label the mark you make when slidinggreen] Slide the business card out from under the Nozzle ''Leftadjusting the screw until you get a mark matching in depth to the first one. Label it '''"Left"'''
[* blackgreen] Keeping your 3D Printing Head locked into the attachment mount ''pull ''the Business Card out from underneath the Nozzle, the Nozzle should create a slight mark on the Business Card. Label this mark ''Back '''"Back"'''
[* blackorange] Send your 3D Printing Head to the ''Front Left'' corner of your BoXZY. The Gode is: ''' G1 X165 Y1'''
[* blackyellow] Slide your Business Card under the Nozzle. YouWith a 3mm allen key wrench you will now adjust the the Bolt in that same corner to Raise or Lower the Leveling Platform so that the Business Card touches the Nozzle, this is seen in the first image
[* black] Label the mark you make when slidinggreen] Slide the business card out from under the Nozzle ''Leftadjusting the screw until you get a mark matching in depth to the first one. Label it '''"Left"'''
[* black] Repeat this step for the ''Front Right ''corner of your BoXZY: The Gcode is: '''G1 X165 Y165'''
[* blackicon_note] You will now have a Business Card with 3 marks made by the Nozzle at each point of leveling, the back, the''the back'', the'' front left and''and the front right''front right'', as seen in the second image
[* icon_note] Examinered] Return to the 3 marksfirst step and use your discretion to judge their uniformity If they are similar you are level. You may return torepeat this step to fine tuneprocess. Do not skip the repeat leveling procedure or your platform at any time beforemay not be perfectly level. This is paramount for successful 3D Printingprinting.
[* blackicon_note] You will now have a Business Card with 3 marks made by the Nozzle at each point of leveling, the back, the''the back'', the'' front left and''and the front right''front right'', as seen in the second image
[* icon_note] Examinered] Return to the 3 marksfirst step and use your discretion to judge their uniformity If they are similar you are level. You may return torepeat this step to fine tuneprocess. Do not skip the repeat leveling procedure or your platform at any time beforemay not be perfectly level. This is paramount for successful 3D Printingprinting.