Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by Just Helping

Edit approved by Just Helping

Before
After
Unchanged

Step Lines

[title] Leveling the Leveling Platform: part 3
[* green] Keeping yourWhile the 3D Printing Head is still locked into the attachment mount ''pull ''the Business Card out from underneath the Nozzle, theNozzle. The Nozzle should create a ''slight'' mark on the Business Card. Label this mark '''"Back"'''
[* green] Keeping yourWhile the 3D Printing Head is still locked into the attachment mount ''pull ''the Business Card out from underneath the Nozzle, theNozzle. The Nozzle should create a ''slight'' mark on the Business Card. Label this mark '''"Back"'''
[* orange] Send your 3D Printing Head to the ''Front Left'' corner of your BoXZY. The Gode is: ''' G1 X165 Y1'''
[* yellow] Slide your Business Card under the NozzleNozzle again. With a 3mm allen key wrench you will now adjust the the Bolt in that same corner to Raise or Lower the Leveling Platform so that the Business Card touchesis just touching the Nozzle, this is seen in the first image
[* yellow] Slide your Business Card under the NozzleNozzle again. With a 3mm allen key wrench you will now adjust the the Bolt in that same corner to Raise or Lower the Leveling Platform so that the Business Card touchesis just touching the Nozzle, this is seen in the first image
[* green] Slide the business card out from under the Nozzle adjusting the screw until you get a mark matching in depth to the first one. Label it '''"Left"'''
[* black] Repeat this step for the ''Front Right ''corner of your BoXZY: The Gcode is: '''G1 X165 Y165'''
[* icon_note] You will now have a Business Card with 3 marks made by the Nozzle at each point of leveling, ''the back'', the'' front left ''and the ''front right'', as seen in the second image
[* red] Return to the first step and repeat this process. Do not skip the repeat leveling procedure or your platform may not be perfectly level. ThisIt is paramount for successful 3D printingimportant you complete this entire process a minimum of 2 times.
[* icon_reminder] You can apply many 3D Printing strategies and advanced techniques to printing with BoXZY. You will need to remove the Leveling Platform and apply a printing surface (you cannot print directy on metal). We recommend Blue Painters tape or Kapton Tape. An example can be seen in the 3rd image. BuildTak is a goodone purpose made option
[* red] Return to the first step and repeat this process. Do not skip the repeat leveling procedure or your platform may not be perfectly level. ThisIt is paramount for successful 3D printingimportant you complete this entire process a minimum of 2 times.
[* icon_reminder] You can apply many 3D Printing strategies and advanced techniques to printing with BoXZY. You will need to remove the Leveling Platform and apply a printing surface (you cannot print directy on metal). We recommend Blue Painters tape or Kapton Tape. An example can be seen in the 3rd image. BuildTak is a goodone purpose made option