Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #12

Edit by BoXZY

Edit approved by BoXZY

Deleted
Added
Unchanged

Step Lines

[title] Checking your Printer Settings
[* red] After having success with the BoXZY Interface Software Installation, before you Slice your 3D Model check your perfered Slicer Configuration Presets
[* red] Select the Slicer tab in your BoXZY Interface and verify that Slicer is set to '''Slic3r''' and that Print and Printer Settings are set to BoXZY
[* red] Select Extruder 1 and verify with your Filament that you are printing with the BoXZY PLA or BoXZY ABS settings
[* green] Select the Slicer tab in your BoXZY Interface and verify that the Slicer is set to CuraEngine and that the Print Configuration is set to BoXZY
[* green] Select Extruder 1 and verify with your Filament that you are printing with BoXZY PLA or BoXZY ABS settings
[* black] If you do not have BoXZY settings available to select please consult <this> guide

Image 1

No previous image

Added

Image 2

No previous image

Added