Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #12

Edit by BoXZY

Edit approved by BoXZY

Before
After
Unchanged

Step Lines

[title] Checking your Printer Settings
[* red] Before you Print your 3D Model, check your Slicer Configuration Presets
[* red] Select the Slicer tab in your BoXZY Interface and verify that Slicer is set to '''Slic3r''' and that Print and Printer Settings are set to BoXZY
[* red] Select Extruder 1 and verify with your Filament that you are printing with the BoXZY PLA or BoXZY ABS settings
[* green] Select the Slicer tab in your BoXZY Interface and verify that the Slicer is set to CuraEngine and that the Print Configuration is set to BoXZY
[* green] Select Extruder 1 and verify with your Filament that you are printing with BoXZY PLA or BoXZY ABS settings
[* black] If you do not have BoXZY settings available to select please consult <this> guide
[* icon_note] For your First Print, that we provide, you won't be Slicing the File, we have the Gcode test print a Box. You will use our Test Print Box to test the Printer without the Slicer, this way we can isolate the variables effecting the 3D Printing