Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #12

Edit by BoXZY

Edit approved by BoXZY

Before
After
Unchanged

Step Lines

[title] Checking your Printer Settings
[* red] Before you Print your 3D Model, check your Slicer Configuration Presets
[* red] Select the Slicer tab in your BoXZY Interface and verify that Slicer is set to '''Slic3r''' and that Print and Printer Settings are set to BoXZY
[* red] Select Extruder 1 and verify with your Filament that you are printing with the BoXZY PLA or BoXZY ABS settings
[* green] Select the Slicer tab in your BoXZY Interface and verify that the Slicer is set to CuraEngine and that the Print Configuration is set to BoXZY
[* green] Select Extruder 1 and verify with your Filament that you are printing with BoXZY PLA or BoXZY ABS settings
[* black] If you do not have BoXZY settings available to select please consult <this> guide
[*
[* icon_note] For your First Print, that we provide, you won't be Slicing the File, we have the Gcode test print a Box. You will use our Test Print Box to test the Printer without the Slicer, this way we can isolate the variables effectingany physical issues with the 3D Printing Head and its movement
[* black] If you do not have BoXZY settings available to select please consult <this> guide
[*
[* icon_note] For your First Print, that we provide, you won't be Slicing the File, we have the Gcode test print a Box. You will use our Test Print Box to test the Printer without the Slicer, this way we can isolate the variables effectingany physical issues with the 3D Printing Head and its movement