Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #12

Edit by Just Helping

Edit approved by Just Helping

Before
After
Unchanged

Step Lines

[title] Checking your Printer Settings
[* red] Beforeicon_reminder] Before you Print your 3D Model, you should check your Slicer Configuration PresetsPresets. The "Slicer" is the program that produces a Gcode script based on your 3D model
[* red] SelectFollowing the first imatge, select the Slicer tab in your BoXZY Interface and verifyInterface. Verify that Slicer is set to '''Slic3r"Slic3r"''' and that Print and Printer Settings are set to BoXZY
[* red] Select Extruder 1 and verify with your Filament that you are printing with the BoXZY PLA or BoXZY ABS settingsprofile is selected
[* red] Beforeicon_reminder] Before you Print your 3D Model, you should check your Slicer Configuration PresetsPresets. The "Slicer" is the program that produces a Gcode script based on your 3D model
[* red] SelectFollowing the first imatge, select the Slicer tab in your BoXZY Interface and verifyInterface. Verify that Slicer is set to '''Slic3r"Slic3r"''' and that Print and Printer Settings are set to BoXZY
[* red] Select Extruder 1 and verify with your Filament that you are printing with the BoXZY PLA or BoXZY ABS settingsprofile is selected
[* green] Select the Slicer tab in your BoXZY Interface and verify that the Slicer is set to CuraEngine and that the Print Configuration is set to BoXZY
[* green] Select Extruder 1 and verify with your Filament that you are printing withthe BoXZY PLA or BoXZY ABS settings
[* icon_note] For your First Print, that we provide, you won't be Slicing the File, we have the Gcode test print a Box. You will use our Test Print Box to test the Printer without the Slicer, this way we can isolate any physical issues with the 3D Printing Head and its movement
profile is selected
[* green] Select Extruder 1 and verify with your Filament that you are printing withthe BoXZY PLA or BoXZY ABS settings
[* icon_note] For your First Print, that we provide, you won't be Slicing the File, we have the Gcode test print a Box. You will use our Test Print Box to test the Printer without the Slicer, this way we can isolate any physical issues with the 3D Printing Head and its movement
profile is selected