Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #12

Edit by Badley Bratt

Edit approved by Badley Bratt

Before
After
Unchanged

Step Lines

[title] Checking your PrinterYour Printer Settings
[* icon_reminder] Before you Printprint a 3D Modelmodel of your choice, you need to check your Slicer Configuration Presets. The "Slicer" is the program that produces a GcodeG-code script based on yourthe 3D model
[*
you want to print.
[*
red] Following the first image, select the Slicer'''Slicer tab in'''in your BoXZY Interface. Verify that Slicer is set to '''"Slic3r"''' and that Print'''Print''' and Printer Settings'''Printer Settings''' are set to BoXZY"'''BoXZY'''." These settings are indicated by red arrows in the image.
[* red] Select Extruder 1'''Extruder 1''' and verify the BoXZY PLA'''"BoXZY PLA"''' profile is selected
[*

[*
green] Now select the Slicer tab'''Slicer tab''' in your BoXZY Interface and verify that the Slicer is set to CuraEngine'''"CuraEngine"''' and that the Print Configuration'''Print Configuration''' is set to BoXZY'''"BoXZY."''' These settings are indicated by green arrows in the second image.
[* green] Select Extruder'''Extruder 1 and'''and verify that the BoXZY PLA'''"BoXZY PLA"''' profile is selectedselected.
[title] Checking your PrinterYour Printer Settings
[* icon_reminder] Before you Printprint a 3D Modelmodel of your choice, you need to check your Slicer Configuration Presets. The "Slicer" is the program that produces a GcodeG-code script based on yourthe 3D model
[*
you want to print.
[*
red] Following the first image, select the Slicer'''Slicer tab in'''in your BoXZY Interface. Verify that Slicer is set to '''"Slic3r"''' and that Print'''Print''' and Printer Settings'''Printer Settings''' are set to BoXZY"'''BoXZY'''." These settings are indicated by red arrows in the image.
[* red] Select Extruder 1'''Extruder 1''' and verify the BoXZY PLA'''"BoXZY PLA"''' profile is selected
[*

[*
green] Now select the Slicer tab'''Slicer tab''' in your BoXZY Interface and verify that the Slicer is set to CuraEngine'''"CuraEngine"''' and that the Print Configuration'''Print Configuration''' is set to BoXZY'''"BoXZY."''' These settings are indicated by green arrows in the second image.
[* green] Select Extruder'''Extruder 1 and'''and verify that the BoXZY PLA'''"BoXZY PLA"''' profile is selectedselected.
[* icon_note] Slic3r and Cura are two different programs for the same task. You choose the one you want.