Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #12

Edit by Badley Bratt

Edit approved by Badley Bratt

Before
After
Unchanged

Step Lines

[title] Checking Your Printer Settings
[* icon_reminder] Before you print a 3D model of your choice, you need to check your Slicer Configuration Presets. The "Slicer" is the program that produces a G-code script based on the 3D model you want to print.
[* red] Following the first image, select the '''Slicer tab '''in your BoXZY Interface. Verify that Slicer is set to '''"Slic3r"''' and that '''Print''' and '''Printer Settings''' are set to "'''BoXZY'''." These settings are indicated by red arrows in the image.
[* red] Select '''Extruder 1''' and verify the '''"BoXZY PLA"''' profile is selected
[* green] Now select the '''Slicer tab''' in your BoXZY Interface and verify that the Slicer is set to '''"CuraEngine"''' and that the '''Print Configuration''' is set to '''"BoXZY."''' These settings are indicated by green arrows in the second image.
[* green] Select '''Extruder 1 '''and verify that the '''"BoXZY PLA"''' profile is selected.
[* icon_note] Slic3r and Cura are two different programs for the same task. You choose the oneWe recommend running your first print using both Slic3r and Cura so you wantget a sense of how each works and differs.
[* icon_note] Slic3r and Cura are two different programs for the same task. You choose the oneWe recommend running your first print using both Slic3r and Cura so you wantget a sense of how each works and differs.