Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #11

Edit by Just Helping

Edit approved by Just Helping

Before
After
Unchanged

Step Lines

[title] Load and Print your Test Print
[* icon_remindericon_note] To test that the physical machine is functioning properly we have provided a test file. This file has already been "Sliced", so you will only need to load the Gcode scriptscript.
[* icon_reminder] The 3D print head should have remained installed from your earlier leveling process. If it has been removed, re-home the X, Y, and Z, and reset the head using the business card method
[* icon_remindericon_note] To test that the physical machine is functioning properly we have provided a test file. This file has already been "Sliced", so you will only need to load the Gcode scriptscript.
[* icon_reminder] The 3D print head should have remained installed from your earlier leveling process. If it has been removed, re-home the X, Y, and Z, and reset the head using the business card method
[* black] Download the Gcode we have provided at [https://drive.google.com/a/boxzy.com/file/d/0B0gOyqLrz4L-Y0IyaXQzM3JEQ1NJbkg0WGNkZWhNcGh3VkZN/view|this] link
[* blackred] Load the Gcode by selecting the Load button in your BoXZY Interface and locating the downloaded Test Print
[* blackblue] Select the '''Start Prin'''t button in your BoXZY Interface
[* blackred] Load the Gcode by selecting the Load button in your BoXZY Interface and locating the downloaded Test Print
[* blackblue] Select the '''Start Prin'''t button in your BoXZY Interface

Image 1

Old Version

New Version