Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #11

Edit by Badley Bratt

Edit approved by Badley Bratt

Before
After
Unchanged

Step Lines

[title] Load and Print your Test Print
[* icon_note] Prior to gettingBefore we get into "slicing" within the "Slicing" software involvedBoXZY Interface, we want to test that the physical machine is functioning properly as a unit. We will do this by running a pre-sliced print file.
[* icon_reminder] The 3D Printing AttachmentHead ''should be ''installed from your earlier leveling process. '''Anytime''' you remove the 3D Print Attachment you must Home the Z axis ''without any attachment'' '''before''' reinstalling. When reinstalling place a business card between the nozzle and the platform before clamping it in place.
[* icon_note] Prior to gettingBefore we get into "slicing" within the "Slicing" software involvedBoXZY Interface, we want to test that the physical machine is functioning properly as a unit. We will do this by running a pre-sliced print file.
[* icon_reminder] The 3D Printing AttachmentHead ''should be ''installed from your earlier leveling process. '''Anytime''' you remove the 3D Print Attachment you must Home the Z axis ''without any attachment'' '''before''' reinstalling. When reinstalling place a business card between the nozzle and the platform before clamping it in place.
[* icon_note] The gap the business card creates will be your first layer printing height. You can use shims of varying thickness in place of the business card for fine tuning. '''This must be done over any tape or printing surface. '''The current settings are for the thickness of the card when the nozzle creates a light groove.
[* black] Download the Gcode we have provided at [https://drive.google.com/a/boxzy.com/file/d/0B0gOyqLrz4L-Y0IyaXQzM3JEQ1NJbkg0WGNkZWhNcGh3VkZN/view|this] link
[* red] Load the Gcode by selecting the Load button in your BoXZY Interface and locating the downloaded Test Print
[* blue] Select the '''Start Print''' button in your BoXZY Interface and watch it print!
[* icon_note] The printer will home itself, then take about 3 minutes to heat up before resuming the print
[* icon_reminder] You've just completed your first print!