Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by Just Helping

Edit approved by Just Helping

Before
After
Unchanged

Step Lines

[title] HEAD DETECTION AND SETTING NOZZLE HEIGHTInitial Attachment Plugin
[* red] When there is no attachment ''plugged in'' the temperature should read '''-27C'''. Please verify this by looking at the temperature reading in the manual control tab as shown with the ''red arrow'' in the first image.
[* icon_reminder] The machine will always be in ''milling mode'' when no head is plugged in and the temperature reading shows -27C. This gives basic 3 axis control.
[* blue] There is a'' log'' at the bottom of the screen that is visible when you de-select '''Easy Mode'''. If it is not visible, click the button as shown with the blue arrow in the 3rd image to de-select it
[* black] Plug the cable into the 3D printer attachment, as seen in the second image.
[* icon_note] This is the connection you should use to plugin or disconnect your attachments. Place the cable out of the way but leave it connected to the machine otherwise.

[* black] Insert wisdom here.The log should indicate "3D printer head detected" when you plugin the 3D printer attachment. Please verify this. The temperature also should now show between 20-30C if the nozzle is at room temperature
[title] HEAD DETECTION AND SETTING NOZZLE HEIGHTInitial Attachment Plugin
[* red] When there is no attachment ''plugged in'' the temperature should read '''-27C'''. Please verify this by looking at the temperature reading in the manual control tab as shown with the ''red arrow'' in the first image.
[* icon_reminder] The machine will always be in ''milling mode'' when no head is plugged in and the temperature reading shows -27C. This gives basic 3 axis control.
[* blue] There is a'' log'' at the bottom of the screen that is visible when you de-select '''Easy Mode'''. If it is not visible, click the button as shown with the blue arrow in the 3rd image to de-select it
[* black] Plug the cable into the 3D printer attachment, as seen in the second image.
[* icon_note] This is the connection you should use to plugin or disconnect your attachments. Place the cable out of the way but leave it connected to the machine otherwise.

[* black] Insert wisdom here.The log should indicate "3D printer head detected" when you plugin the 3D printer attachment. Please verify this. The temperature also should now show between 20-30C if the nozzle is at room temperature

Image 1

No previous image

Added

Image 2

No previous image

Added