Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by Just Helping

Edit approved by Just Helping

Before
After
Unchanged

Step Lines

[title] InitialPlugging in the 3D Printing Attachment Plugin
[* red] WhenYour BoXZY is always ready for Milling when there is no attachment ''plugged in'' thein.'' In this statethe temperature should read '''-27C'''. Please verify this by looking at the temperature reading in the manual control tab as shown with the ''red arrow'' in the first image.
[* icon_reminder] The machine will always be in ''milling mode'' when no head is plugged in and the temperature reading shows -27C. This gives basic 3 axis control.
[title] InitialPlugging in the 3D Printing Attachment Plugin
[* red] WhenYour BoXZY is always ready for Milling when there is no attachment ''plugged in'' thein.'' In this statethe temperature should read '''-27C'''. Please verify this by looking at the temperature reading in the manual control tab as shown with the ''red arrow'' in the first image.
[* icon_reminder] The machine will always be in ''milling mode'' when no head is plugged in and the temperature reading shows -27C. This gives basic 3 axis control.
[* blue] There is a'' log'' at the bottom of the screen that is visible when you de-select '''Easy Mode'''. If it is not visible, click the button as shown with the blue arrow in the 3rd image to de-select it
[* violet] Plug the cable into the 3D printer attachment, as seen in the second image.
[* icon_note] This is the connection you should use to pluginplug in or disconnect your attachments. Place the cable out of the way but leave it connected to the machine otherwise.
[* black] The log should indicate "3D printer head detected" when you pluginplug in the 3D printer attachment. If you missed it, watch it as you disconnect and reconnect the harness. The temperature also should now show between 20-30C if the nozzle is at room temperature
[* icon_note] This is the connection you should use to pluginplug in or disconnect your attachments. Place the cable out of the way but leave it connected to the machine otherwise.
[* black] The log should indicate "3D printer head detected" when you pluginplug in the 3D printer attachment. If you missed it, watch it as you disconnect and reconnect the harness. The temperature also should now show between 20-30C if the nozzle is at room temperature