Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by Badley Bratt

Edit approved by Badley Bratt

Before
After
Unchanged

Step Lines

[title] Plugging in the 3D Printing Attachment
[*
Head
[*
red] Your BoXZY is always ready for Milling when there is no attachment ''plugged in.''Attachment Head plugged into the Attachment Mount. In this state the temperature should read '''-27C-'''27C'''. Please verify this by looking at the temperature reading in the manual control tab as shown withby the ''red arrow''red arrow in the first image.
[* blue] There is a'' log''a log at the bottom of the screen that is visible when you select '''Toggle Log'''. If it is not visible, click the button as shown withby the blue arrow in the 3rdthird image to select itit.
[* violet] Plug the cable into the 3D printer attachmentHead, as seen in the second image. Pink arrows indicate where the cable plugs in.
[* icon_note] This is the connection you should use to plug in or disconnect your attachments. PlaceAttachment Heads. Leave the cable outplugged into the waymachine, but leave it connected tomake sure it's out of the machine otherwiseway while you work.
[* black] The log should indicatesay "3D printer head detected" when you plug in the 3D printer attachmentPrinter Head and "Milling head detected" when removedyou remove it. If you missed it, watch it as you disconnect and reconnect the harness. The temperature should now show between 20-30C'''20-30C''' if the nozzle is at room temperaturetemperature.
[* icon_caution] Never unplug the harness while the 3D Printer AttachmentHead is heating,heating or the fan is running.
[title] Plugging in the 3D Printing Attachment
[*
Head
[*
red] Your BoXZY is always ready for Milling when there is no attachment ''plugged in.''Attachment Head plugged into the Attachment Mount. In this state the temperature should read '''-27C-'''27C'''. Please verify this by looking at the temperature reading in the manual control tab as shown withby the ''red arrow''red arrow in the first image.
[* blue] There is a'' log''a log at the bottom of the screen that is visible when you select '''Toggle Log'''. If it is not visible, click the button as shown withby the blue arrow in the 3rdthird image to select itit.
[* violet] Plug the cable into the 3D printer attachmentHead, as seen in the second image. Pink arrows indicate where the cable plugs in.
[* icon_note] This is the connection you should use to plug in or disconnect your attachments. PlaceAttachment Heads. Leave the cable outplugged into the waymachine, but leave it connected tomake sure it's out of the machine otherwiseway while you work.
[* black] The log should indicatesay "3D printer head detected" when you plug in the 3D printer attachmentPrinter Head and "Milling head detected" when removedyou remove it. If you missed it, watch it as you disconnect and reconnect the harness. The temperature should now show between 20-30C'''20-30C''' if the nozzle is at room temperaturetemperature.
[* icon_caution] Never unplug the harness while the 3D Printer AttachmentHead is heating,heating or the fan is running.