Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by Badley Bratt

Edit approved by Badley Bratt

Before
After
Unchanged

Step Lines

[title] Plugging in the 3D Printing Head
[* red] Your BoXZY is always ready for Milling when there is no Attachment Head plugged into the Attachment Mount. In this state the temperature should read -'''27C'''. Please verify this by looking at the temperature reading in the manual controlManual Control tab as shown by the red arrow in the first image.
[* red] Your BoXZY is always ready for Milling when there is no Attachment Head plugged into the Attachment Mount. In this state the temperature should read -'''27C'''. Please verify this by looking at the temperature reading in the manual controlManual Control tab as shown by the red arrow in the first image.
[* blue] There is a log at the bottom of the screen that is visible when you select '''Toggle Log'''. If it is not visible, click the button shown by the blue arrow in the third image to select it.
[* violet] Plug the cable into the 3D printer Head, as seen in the second image. Pink arrows indicate where the cable plugs in.
[* icon_note] This is the connection you should use to plug in or disconnect your Attachment Heads. Leave the cable plugged into the machine, but make sure it's out of the way while you work.
[* black] The log should say "3D printer head detected" when you plug in the 3D Printer Head and "Milling head detected" when you remove it. If you missed it, watch it as you disconnect and reconnect the harness. The temperature should now show between '''20-30C''' if the nozzle is at room temperature.
[* icon_caution] Never unplug the harness while the 3D Printer Head is heating or the fan is running.