Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #15

Edit by Badley Bratt

Edit approved by Badley Bratt

Before
After
Unchanged

Step Lines

[title] Loading Your Design, Slicing, and Printing
[* icon_reminder] Now that everything is set up, verified, and tested you will only have to follow these steps to print with BoXZY when you so desire:
[* black] Insert filament.
[* black] Apply your printing surface (e.g. masking tape), home the Z, then insert your 3D Printing Head over a business card. Lock the Head in with the lever and remove the business card. (You do not need to repeat this process between prints unless you loosen or remove the Head.) Make sure your platform has a printing surface and nothing else on it.
[* orange] Click '''Load''' to load your STL 3D filefile, as shown in the orange box in the image. Search [http://www.thingiverse.com|Thingiverse] if you would like to find one, or design your own in Fusion 360.
[* blue] After selecting your preferred slicer and settings, click the '''Slice with''' buttonbutton, shown in the blue box in the image, and allow it to complete.
[* icon_note] Once completeit's done slicing the file, the slicer will automatically load the new GcodeG-code script into the G-code editorEditor and show you a 3D preview of the gcodeG-code.
[* violet] '''Just press ++Start Print++press''' Start Print '''(shown in the pink box in the image), wait for it to heat up, and watch it print!'''
[*

[*
icon_reminder] If you have any issues with print quality, start to learn about tuning your slicer settings and your machine [guide|130|Hereguide|130|here.]
[* orange] Click '''Load''' to load your STL 3D filefile, as shown in the orange box in the image. Search [http://www.thingiverse.com|Thingiverse] if you would like to find one, or design your own in Fusion 360.
[* blue] After selecting your preferred slicer and settings, click the '''Slice with''' buttonbutton, shown in the blue box in the image, and allow it to complete.
[* icon_note] Once completeit's done slicing the file, the slicer will automatically load the new GcodeG-code script into the G-code editorEditor and show you a 3D preview of the gcodeG-code.
[* violet] '''Just press ++Start Print++press''' Start Print '''(shown in the pink box in the image), wait for it to heat up, and watch it print!'''
[*

[*
icon_reminder] If you have any issues with print quality, start to learn about tuning your slicer settings and your machine [guide|130|Hereguide|130|here.]