Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Badley Bratt

Edit approved by Badley Bratt

Before
After
Unchanged

Step Lines

[title] Choosing a Printing Surface Covering
[* black] dfasdfsfsTo yield the best possible results, it's important to apply a printing surface to your Leveling Platform. This helps the 3D print stick to the platform and encourages first layer adhesion. Your 3D prints will not adhere directly to the metal Leveling Platform.
[* icon_note] If you're just starting out with 3D printing, we recommend using [https://www.amazon.com/Gizmo-Dorks-Blue-Painters-Printers/dp/B00LAJNM7S/ref=sr_1_4?ie=UTF8&qid=1469721509&sr=8-4&keywords=3d+printers+painters+tape|wide blue painters tape]. To get the best results with it, lightly sand it with 80 grit sandpaper to rough up the surface a bit. Wipe that down with Windex and let it dry before printing. Older tape that has been printed on a few times wears in and works better with age.
[* icon_note] You can also use masking tape or [https://www.kaptontape.com/|Kapton Tape] as a printing surface. [https://www.buildtak.com/|BuildTak] is one option made specifically for this purpose.
[* black] Remove the Leveling Platform to apply your chosen printing surface to it.
[title] Choosing a Printing Surface Covering
[* black] dfasdfsfsTo yield the best possible results, it's important to apply a printing surface to your Leveling Platform. This helps the 3D print stick to the platform and encourages first layer adhesion. Your 3D prints will not adhere directly to the metal Leveling Platform.
[* icon_note] If you're just starting out with 3D printing, we recommend using [https://www.amazon.com/Gizmo-Dorks-Blue-Painters-Printers/dp/B00LAJNM7S/ref=sr_1_4?ie=UTF8&qid=1469721509&sr=8-4&keywords=3d+printers+painters+tape|wide blue painters tape]. To get the best results with it, lightly sand it with 80 grit sandpaper to rough up the surface a bit. Wipe that down with Windex and let it dry before printing. Older tape that has been printed on a few times wears in and works better with age.
[* icon_note] You can also use masking tape or [https://www.kaptontape.com/|Kapton Tape] as a printing surface. [https://www.buildtak.com/|BuildTak] is one option made specifically for this purpose.
[* black] Remove the Leveling Platform to apply your chosen printing surface to it.

Image 1

No previous image

Added