Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by Badley Bratt

Edit approved by Badley Bratt

Deleted
Added
Unchanged

Step Lines

[title] The BoXZY Laser Tab: Process Panel
[* black] '''Process Panel'''
[*
red] You have the options to '''Engrave '''an image, '''Cut Outline''' an image or '''Both '''using the dropdown box in the Process Panel. This is shown by the red arrow in the image.
[*

[*
orange] You can adjust the '''Speed''' as a ''percentage'' of the maximum speed that BoXZY will allow, indicated by the orange arrow.
[*

[*
yellow] You can adjust the '''Power''' as a ''percentage'' of the maximum power that BoXZY will allow, as indicated by the yellow arrow.
[*

[*
yellow] You can adjust the range of colorsshades in your image file by adjusting the Power Value between 0 and 100, as shown in the yellow box in the image. A '''0''' setting won't etch or cut and a '''100''' setting will etch or cut everything identically.
[*

[*
light_blue] When the '''Antialiasing Cut Edges''' box is checked, the edges of your image will be smoothed out and less pixelated when the laser performs a cut path.
[*

[*
violet] The purple arrow indicates the '''Home X and Y button.''' Be careful using this button with your Laser Head inserted into your Attachment Mount when there is material on your Leveling Platform.
[*

[*
green] Begin your etch by selecting the '''Print''' button. '''Be sure that you and anyone around you are wearing Laser Safety Glasses while the laser is on.'''
[title] The BoXZY Laser Tab: Process Panel
[* black] '''Process Panel'''
[*
red] You have the options to '''Engrave '''an image, '''Cut Outline''' an image or '''Both '''using the dropdown box in the Process Panel. This is shown by the red arrow in the image.
[*

[*
orange] You can adjust the '''Speed''' as a ''percentage'' of the maximum speed that BoXZY will allow, indicated by the orange arrow.
[*

[*
yellow] You can adjust the '''Power''' as a ''percentage'' of the maximum power that BoXZY will allow, as indicated by the yellow arrow.
[*

[*
yellow] You can adjust the range of colorsshades in your image file by adjusting the Power Value between 0 and 100, as shown in the yellow box in the image. A '''0''' setting won't etch or cut and a '''100''' setting will etch or cut everything identically.
[*

[*
light_blue] When the '''Antialiasing Cut Edges''' box is checked, the edges of your image will be smoothed out and less pixelated when the laser performs a cut path.
[*

[*
violet] The purple arrow indicates the '''Home X and Y button.''' Be careful using this button with your Laser Head inserted into your Attachment Mount when there is material on your Leveling Platform.
[*

[*
green] Begin your etch by selecting the '''Print''' button. '''Be sure that you and anyone around you are wearing Laser Safety Glasses while the laser is on.'''