Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by Badley Bratt

Edit approved by Badley Bratt

Deleted
Added
Unchanged

Step Lines

[title] The BoXZY Laser InterfaceTab: Focus Panel
[title] The BoXZY Laser InterfaceTab: Focus Panel
[* black] '''Focus Panel'''
[* red] The '''Focus '''button (shown by the red arrow) will send the Z axis to the position of 50.7mm, thiswhich is the focal distance of the Laserlaser.
[* orange] The '''Material''' box (shown by the orange arrow) is where you enter the thickness of the '''Material '''you will be using the Laser onmaterial you're lasering. This thickness will be added to the total distance of focus. ''Material Thickness + 50.7''focal distance.
[* green] The '''Z''' box (shown by the green arrow) is the read outread-out of ''Material Thickness'' and the ''Focal Distance''material thickness + the focal distance (50.7mm).
[* green] The '''Arrows '''in the Z box will adjust the Laser focus by 0.1mm up or down. These arrows will allow you to adjust the Laser focus and fine tunefine-tune the quality of your Etchetching or Cutcut.
[* yellow] The '''Z Buttonbutton''' will send the Build PlateMilling Platform and Leveling Platform to the Z axis originhome. '''Do Notnot''' use this button when there is material in your BoXZY or otheranother Attachment Head in the Attachment MountMount.
[* light_blue] The '''Single Arrow Z '''ButtonButton''' (shown by the light blue arrow) will move the Z axis up or down 1mm1mm.
[* blue] The '''Double Arrow Z '''ButtonButton''' (shown by the dark blue arrow) will move the Z axis up or down 10mm10mm.
[* red] The '''Focus '''button (shown by the red arrow) will send the Z axis to the position of 50.7mm, thiswhich is the focal distance of the Laserlaser.
[* orange] The '''Material''' box (shown by the orange arrow) is where you enter the thickness of the '''Material '''you will be using the Laser onmaterial you're lasering. This thickness will be added to the total distance of focus. ''Material Thickness + 50.7''focal distance.
[* green] The '''Z''' box (shown by the green arrow) is the read outread-out of ''Material Thickness'' and the ''Focal Distance''material thickness + the focal distance (50.7mm).
[* green] The '''Arrows '''in the Z box will adjust the Laser focus by 0.1mm up or down. These arrows will allow you to adjust the Laser focus and fine tunefine-tune the quality of your Etchetching or Cutcut.
[* yellow] The '''Z Buttonbutton''' will send the Build PlateMilling Platform and Leveling Platform to the Z axis originhome. '''Do Notnot''' use this button when there is material in your BoXZY or otheranother Attachment Head in the Attachment MountMount.
[* light_blue] The '''Single Arrow Z '''ButtonButton''' (shown by the light blue arrow) will move the Z axis up or down 1mm1mm.
[* blue] The '''Double Arrow Z '''ButtonButton''' (shown by the dark blue arrow) will move the Z axis up or down 10mm10mm.