Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by Badley Bratt

Edit approved by Badley Bratt

Deleted
Added
Unchanged

Step Lines

[title] The BoXZY Laser Tab: Focus Panel
[* black] '''Focus Panel'''
[* red] The '''Focus '''button (shown by the red arrow) will send the Z axis to the position of 50.7mm, which is the laser's focal distance of the laserdistance, 50.7mm.
[* orange] The '''Material''' box (shown by the orange arrow) is where you enter the thickness of the material you're lasering. This thickness will be added to the focal distance.
[* green] The '''Z''' box (shown by the green arrow) isshows the read-out ofvalue you get when you add the material thickness +to the laser's focal distance (50.7mm)distance.
[* green] The '''Arrows '''in the Z box will adjust the Laserlaser focus by 0.1mm up or down. These arrows will allow you to adjust the Laser focus and fine-tune the quality of your etching or cut.
[* yellow] The '''Z button''' will send the Milling Platform and Leveling Platform to the Z axis home. '''Do not''' use this button when there is material in your BoXZY or anotheran Attachment Head in the Attachment Mount.
[* red] The '''Focus '''button (shown by the red arrow) will send the Z axis to the position of 50.7mm, which is the laser's focal distance of the laserdistance, 50.7mm.
[* orange] The '''Material''' box (shown by the orange arrow) is where you enter the thickness of the material you're lasering. This thickness will be added to the focal distance.
[* green] The '''Z''' box (shown by the green arrow) isshows the read-out ofvalue you get when you add the material thickness +to the laser's focal distance (50.7mm)distance.
[* green] The '''Arrows '''in the Z box will adjust the Laserlaser focus by 0.1mm up or down. These arrows will allow you to adjust the Laser focus and fine-tune the quality of your etching or cut.
[* yellow] The '''Z button''' will send the Milling Platform and Leveling Platform to the Z axis home. '''Do not''' use this button when there is material in your BoXZY or anotheran Attachment Head in the Attachment Mount.
[* light_blue] The '''Single Arrow Z Button''' (shown by the light blue arrow) will move the Z axis up or down 1mm.
[* blue] The '''Double Arrow Z Button''' (shown by the dark blue arrow) will move the Z axis up or down 10mm.