Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by BoXZY

Edit approved by BoXZY

Deleted
Added
Unchanged

Step Lines

[title] Setting up your BoXZY to Test the Laser: part 2
[* red] In your BoXZY Interface, Select the '''Load''' button and locate the '''BoXZY Laser Test''' file you downloaded in the last step of this guide
[* icon_reminder] The BoXZY Laser Test file is a Gcode file. We are doing this to test the Laser Attachment itself before we dive into the BoXZY Laser Tab Interface
[* icon_caution] Put your Laser Safety Glasses on and make sure that there is no one else in the immediate area without Laser Safety Glasses on
[* orange] ''Select'' '''Start Print''' and watch your BoXZY perform the BoXZY Laser Test etching
[*
black] Insert wisdom here.When the Gcode BoXZY Laser Test etch is finished the laser module will turn itself Off, press your E-Stop on your BoXZY Power Supply and examine your BoXZY Laser Test etch
[* red] In your BoXZY Interface, Select the '''Load''' button and locate the '''BoXZY Laser Test''' file you downloaded in the last step of this guide
[* icon_reminder] The BoXZY Laser Test file is a Gcode file. We are doing this to test the Laser Attachment itself before we dive into the BoXZY Laser Tab Interface
[* icon_caution] Put your Laser Safety Glasses on and make sure that there is no one else in the immediate area without Laser Safety Glasses on
[* orange] ''Select'' '''Start Print''' and watch your BoXZY perform the BoXZY Laser Test etching
[*
black] Insert wisdom here.When the Gcode BoXZY Laser Test etch is finished the laser module will turn itself Off, press your E-Stop on your BoXZY Power Supply and examine your BoXZY Laser Test etch

Image 1

No previous image

Added

Image 2

No previous image

Added