Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by BoXZY

Edit approved by BoXZY


Step Lines

[title] Setting up your BoXZY to Test the Laser: part 2
[* black] Go to this link and download the BoXZY Laser Test file that we have prepared for you
[* red] In your BoXZY Interface, Select the '''Load''' button and locate the '''BoXZY Laser Test''' file you downloaded
[* icon_reminder] The BoXZY Laser Test file is a Gcode file. We are doing this without the BoXZY Laser Tab Interface to test the Laser Attachment itself before we dive into how to use the BoXZY Laser Tab Interface
[* icon_caution] Put your Laser Safety Glasses on and make sure that anyone in viewing distance of the Laser is wearing Laser Safety Glasses
[* orange] ''Select'' '''Start Print''' and watch your BoXZY perform the BoXZY Laser Test
[* black] When the Gcode for the BoXZY Laser Test etch is finished the laser module will turn itself Off, press your E-Stop on your BoXZY Power Supply and examine your BoXZY Laser Test
[* black] You should see the BoXZY Robot Icon etched into the cardboard. If it resembles the third image your laser is working and now we can begin using the BoXZY Laser Interface to adjust and fine tune Image files for the BoXZY Laser