Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by Just Helping

Edit approved by Just Helping

Deleted
Added
Unchanged

Step Lines

[title] Setting up your BoXZY to Test the Laser: Part 2
[* black] Go to [https://drive.google.com/a/boxzy.com/file/d/0B0gOyqLrz4L-bEEwQUJMRmFLc3lGa1g5TklTaTRjc1VZdUdr/view|this] link and download the BoXZY Laser Test file that we have prepared
[* red] In your BoXZY Interface, Select the '''Load''' button and locate the '''BoXZY Laser Test''' file you downloaded
[* icon_reminder] The BoXZY Laser Test file is a Gcode file. We are doing this without the BoXZY Laser Tab Interface to test the Laser Attachment itself before we dive into how to use the BoXZY Laser Tab InterfaceInterface. ''We will not use this load button for opening images''
[* icon_reminder] The BoXZY Laser Test file is a Gcode file. We are doing this without the BoXZY Laser Tab Interface to test the Laser Attachment itself before we dive into how to use the BoXZY Laser Tab InterfaceInterface. ''We will not use this load button for opening images''
[* icon_caution] Put your Laser Safety Glasses on and make sure that anyone in viewing distance of the Laser is wearing Laser Safety Glasses
[* orange] ''Select'' '''Start Print''' and watch your BoXZY perform the BoXZY Laser Test
[* black] When the Gcode for the BoXZY Laser Test etch is finished the laser module will turn itself Off, press your E-Stop on your BoXZY Power Supply and examine your BoXZY Laser Test
[* icon_reminder] You should see the BoXZY Robot Icon etched into the cardboard. If it resembles or looks similar to the ''third image'', your Laser Attachment is functioning well. You can use a clean, dry microfiber cloth to clean off any carbon residue. Any oils or moisture will smear the black carbon and make it very difficult to remove
[* black] Next we will begin using the BoXZY Laser Interface to adjust and fine tune Image files for the BoXZY Laser