Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by Badley Bratt

Edit approved by Badley Bratt

Deleted
Added
Unchanged

Step Lines

[title] Setting up your BoXZY to Test the Laser: Part 2
[* black] Go to [https://drive.google.com/a/boxzy.com/file/d/0B0gOyqLrz4L-bEEwQUJMRmFLc3lGa1g5TklTaTRjc1VZdUdr/view|this link] and download the BoXZY Laser Test file.
[* red] In the BoXZY Interface, select the '''Load''' button and locate the '''BoXZY Laser Test''' file you downloaded.
[* icon_note] The BoXZY Laser Test file is a G-code filescript. Usually, you open an image file to laser etch in the '''BoXZY Laser Tab''' and you don't use thethis '''Load''' button. Right now, we just want to test the Laser Head itself, so we're using this G-code fileG-code. Later, we'll dive into how to etch images using the BoXZY Laser Tab.
[* icon_note] The BoXZY Laser Test file is a G-code filescript. Usually, you open an image file to laser etch in the '''BoXZY Laser Tab''' and you don't use thethis '''Load''' button. Right now, we just want to test the Laser Head itself, so we're using this G-code fileG-code. Later, we'll dive into how to etch images using the BoXZY Laser Tab.
[* icon_caution] '''Put your Laser Safety Glasses on and make sure that anyone in viewing distance of the laser is wearing Laser Safety Glasses.'''
[* orange] Click '''Start Print''' and watch BoXZY perform the Laser Test.
[* black] When the G-code forAfter the BoXZY Laser Test etchG-code is finisheddone running, the Laser Head will turn itself OFFoff. Press the '''physical e-stop''' on the Power Station and examine your Laser Testetching.
[* icon_reminder] You should see the BoXZY robot icon etched into the cardboard. If it resembles or looks similar to the third image, your Laser Head is functioning well. You can use a clean, dry microfiber cloth to clean off any carbon residue from the etching. Any oils or moisture will smear the black carbon and make it very difficult to remove.
[* black] When the G-code forAfter the BoXZY Laser Test etchG-code is finisheddone running, the Laser Head will turn itself OFFoff. Press the '''physical e-stop''' on the Power Station and examine your Laser Testetching.
[* icon_reminder] You should see the BoXZY robot icon etched into the cardboard. If it resembles or looks similar to the third image, your Laser Head is functioning well. You can use a clean, dry microfiber cloth to clean off any carbon residue from the etching. Any oils or moisture will smear the black carbon and make it very difficult to remove.
[* black] Next, we'll begin using the BoXZY Laser Tab to adjust and fine-tune image files for the Laser Head.