Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #10

Edit by Just Helping

Edit approved by Just Helping

Deleted
Added
Unchanged

Step Lines

[title] Preparing an Image file for BoXZY
[* black] When preparing an image file to EtchEtch, you will need to have your image file scaled relative to BoXZY's resolutionnative resolution, which is 254 pixels per inch.
[* black] When preparing an image file to EtchEtch, you will need to have your image file scaled relative to BoXZY's resolutionnative resolution, which is 254 pixels per inch.
[* black] Take note of the orientation of BoXZY in the left window of the Preview pane:
[* blue] The blue arrow points to the pulley cover for the Y axis
[* orange] The orange arrow points to the X/Y Home axes. This is where all images will be first placed when uploading
[* green] The green circle indicates a red crosshair, which shows where the Laser Attachment is centered over
[* icon_note] You may have to modify your image orientation depending on how you place your object within BoXZY
[* black] When creating your image file to be an exact size you will need to understand that one(1) pixel is 0.1mm
[* black] This meansicon_reminder] For example, if an image needs to be 20mm wide the file needs to be 200 pixels wide in the file creation program
[* black] This meansicon_reminder] For example, if an image needs to be 20mm wide the file needs to be 200 pixels wide in the file creation program